Revision as of 00:58, 27 December 2011

Overview

@@ Line 6: / Line 6: @@
 <iframe width="500" height="284" src="https://www.youtube.com/embed//suxEJFXj1b4" frameborder="0" allowfullscreen></iframe>
 </html>
-=Operation=
-For first time startup.
-The machine comes with
-#Check connections in the controller box and tighten with a screwdriver if necessary
-#Check connections from the controller to the solenoid valves
-#Check that hydraulic hoses are tight and tighten if necessary
-#Connect power to the controller.
-#Upload CEB Testing Code to
-=Troubleshooting=
-If machine is not receiving hydraulic power, first check the flowchart for [[Hydraulic System Troubleshooting]].
-Then check the [
-=Repair=
-.5.4  [[Basic Troubleshooting Skills]]The CEB is designed for disassembly, meaning that many parts can be replaced readily from steel stock sections. We recommend a visit to a local metal fabrication shop to secure parts. All parts may be fabricated with a welder,  See the exploded parts diagram for a complete list of parts and identify the part that is broken.
-[[Image:CEB_EPD.jpg]]
-Refer to the [[A-Z Instructionals]] or [[CEB Fabrication Drawings]] to identify the fabrication requirements for the part, and take the instructions to your fabrication shop.