Revision as of 04:00, 27 December 2011

Mechanical Fabrication

These videos are rough and could use editing via remote collaboration. Please put a check when item has been edited.

Please put a link to your edited video.

Most of these just need the beginning and ends chopped off, and maybe some dead spots in the middle cut out.

@@ Line 1: / Line 1: @@
+=Mechanical Fabrication=
+These videos are rough and could use editing via remote collaboration. Please put a check [[Image:check.png]] when item has been edited.
+Please put a link to your edited video.
-==Videos to be edited==
-Please put a check [[Image:check.png]] when item has been edited.
-Please put a link in the edited section to your edited video. <br/>
 Most of these just need the beginning and ends chopped off, and maybe some dead spots in the middle cut out.
 *[http://www.youtube.com/watch?v=HnFXzrwzsjg&list=UUjvBN1r7UXXqmIbx_u7bIAw&index=339&feature=plpp_video Squaring CEB Drawer]
- I'm not sure what needs to be cut out of the one above this comment.
- None of the videos below this comment have the "remix" option available.
 *[http://www.youtube.com/watch?v=bahhYtxy4Zg&list=UUjvBN1r7UXXqmIbx_u7bIAw&index=203&feature=plpp_video Using Shims]
 *[http://www.youtube.com/watch?v=xzoen7x46qI&feature=plcp&context=C25a19UDOEgsToPDskIAkvoB_CvbQhwcyvcZWDp5 Adjusting the drawer]
@@ Line 17: / Line 18: @@
 ==Videos Needed==
 *[http://makeprojects.com/Project/CEB-Shaker-Hammer-and-Shaft/1725/1#s8916 How to make coupler for shaft]
 *[http://opensourceecology.org/wiki/CEB_Press/Manufacturing_Instructions/Frame_with_main_cylinder#Step_10:_Fit_the_drawer_members How to fit the drawer members]