Torch Table Log: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
*2.21.09 - After reviewing the [[MechMate]] design for an open source router table, we decided to adapt a spring tensioning mechanism, v-groove bearings, and inverted gear rack for addressing debris issues. Jeremy is drawing up the new design. | *2.21.09 - After reviewing the [[MechMate]] design for an open source router table, we decided to adapt a spring tensioning mechanism, v-groove bearings, and inverted gear rack for addressing debris issues. Jeremy is drawing up the new design. Marcin talked to [[Bryan Bishop]], who is currently building out the bootstrapping Austin Fab Lab, and is the first open source fab lab we encountered outside of the [[Factor e Fab Lab]]. | ||
*2.16.09 - Development forum was set up - join here: [http://www.globalswadeshi.net/group/opensourcetorchtable] | *2.16.09 - Development forum was set up - join here: [http://www.globalswadeshi.net/group/opensourcetorchtable] | ||
*2.13.09 - Jeremy updated 3D drawings; blogging about torch table; sent it for review to Jack C.*( | *2.13.09 - Jeremy updated 3D drawings; blogging about torch table; sent it for review to Jack C.*( | ||
Revision as of 03:35, 22 February 2009
- 2.21.09 - After reviewing the MechMate design for an open source router table, we decided to adapt a spring tensioning mechanism, v-groove bearings, and inverted gear rack for addressing debris issues. Jeremy is drawing up the new design. Marcin talked to Bryan Bishop, who is currently building out the bootstrapping Austin Fab Lab, and is the first open source fab lab we encountered outside of the Factor e Fab Lab.
- 2.16.09 - Development forum was set up - join here: [1]
- 2.13.09 - Jeremy updated 3D drawings; blogging about torch table; sent it for review to Jack C.*(
- 12.9.08 - Materials laid out in greenhouse. Blogged about it: