CNCCMV2/Structure/Blocks

Fabricate Platform

• 

• File:PlatformV2.pdf

• Qty=1

• Mark all holes using 2 datum edges in the L-shape.

• Drill all holes

Fabricate X Minor Block

• 

• File:XMinorBlockV2.pdf

• Qty=2

• Match all thru holes with corresponding X Major Blocks, Y Major Block, and Y Minor Block

• Mark all blind holes

• Tap holes as necessary

Fabricate X Major Block

• 

• File:XMajorBlockV2.pdf

• Qty=2

• Mark all blind holes and remaining thru holes

• Tap holes as necessary

Fabricate Y Minor Block

• 

• File:YMinorBlockV2.pdf

• Qty=1

• Match the Y-axis thru holes with Y Major Block and Z Mount Block

• Mark all blind holes

• Tap holes as necessary

Fabricate Y Major Block

• 

• File:YMajorBlockV2.pdf

• Qty=1

• Mark all blind holes and remaining thru holes

• Tap holes as necessary

Fabricate Z Minor Block

• 

• File:ZMinorBlockV2.pdf

• Qty=1

• Match all thru holes with Z Major Block, Z Mount Block (both ends), and End Mount Block

• Tap holes as necessary

Fabricate Z Major Block

• 

• File:ZMajorBlockV2.pdf

• Qty=1

Fabricate Z Mount Block

• 

• File:ZMountBlockV2.pdf

• Qty=1

• Mark all blind holes

Fabricate Spindle Block

• 

• File:SpindleBlockV2.pdf

• Qty=1

• Match the mounting thru holes with End Mount Block

• Tap holes as necessary

Fabricate End Mount Block

• 

• File:EndMountBlockV2.pdf

• Qty=1

• Mark all remaining blind holes

• Tap holes as necessary