CNCCMV2/Structure/Blocks: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 11: | Line 11: | ||
*Drill all holes | *Drill all holes | ||
=Fabricate X | =Fabricate X Major Block= | ||
*[[Image: | *[[Image: XMajorBlockV2.jpg|300px]] | ||
*[[File: | *[[File: XMajorBlockV2.pdf]] | ||
*Qty=2 | *Qty=2 | ||
*Match | *Mark all holes for the first block, noting the datum edge orientation. | ||
*Mark the blind holes for the second block in the same way as the first, noting the datum edge orientation. | |||
*Drill a 1/8" dia hole at the stepper shaft mark for the first block. | |||
*Drill 4 holes of 5mm dia at the stepper mount marks for the first block. | |||
*Check mounting compatibility between the first block and the stepper motor. | |||
*Drill a 12mm dia hole at the support shaft mark for the first block. | |||
*Match the 1/8", stepper mount, and support shaft holes from the first block to the second block. | |||
*Check mounting compatibility between the second block and the stepper motor. | |||
*Match the 1/8" and support shaft holes from the first block to 2 X Minor Blocks, 1 Y Major Block, and 1 Y Minor Block, noting the matching orientation. | |||
*Drill the stepper shaft hole to its correct diameter. | |||
* | *Drill the blind holes for the first and second blocks. | ||
*Tap holes | *Tap the blind holes for the first and second blocks. | ||
=Fabricate X | =Fabricate X Minor Block= | ||
*[[Image: | *[[Image: XMinorBlockV2.jpg|300px]] | ||
*[[File: | *[[File: XMinorBlockV2.pdf]] | ||
*Qty=2 | *Qty=2 | ||
*Mark | *Mark the blind holes for the first and second blocks. | ||
*Drill the blind holes. | |||
*Tap holes | *Tap the blind holes. | ||
=Fabricate Y Minor Block= | =Fabricate Y Minor Block= | ||
Revision as of 15:31, 25 April 2012
Fabricate Platform
- Qty=1
- Mark all holes using 2 datum edges in the L-shape.
- Drill all holes
Fabricate X Major Block
- Qty=2
- Mark all holes for the first block, noting the datum edge orientation.
- Mark the blind holes for the second block in the same way as the first, noting the datum edge orientation.
- Drill a 1/8" dia hole at the stepper shaft mark for the first block.
- Drill 4 holes of 5mm dia at the stepper mount marks for the first block.
- Check mounting compatibility between the first block and the stepper motor.
- Drill a 12mm dia hole at the support shaft mark for the first block.
- Match the 1/8", stepper mount, and support shaft holes from the first block to the second block.
- Check mounting compatibility between the second block and the stepper motor.
- Match the 1/8" and support shaft holes from the first block to 2 X Minor Blocks, 1 Y Major Block, and 1 Y Minor Block, noting the matching orientation.
- Drill the stepper shaft hole to its correct diameter.
- Drill the blind holes for the first and second blocks.
- Tap the blind holes for the first and second blocks.
Fabricate X Minor Block
- Qty=2
- Mark the blind holes for the first and second blocks.
- Drill the blind holes.
- Tap the blind holes.
Fabricate Y Minor Block
- Qty=1
- Match the Y-axis thru holes with Y Major Block and Z Mount Block
- Mark all blind holes
- Tap holes as necessary
Fabricate Y Major Block
- Qty=1
- Mark all blind holes and remaining thru holes
- Tap holes as necessary
Fabricate Z Minor Block
- Qty=1
- Match all thru holes with Z Major Block, Z Mount Block (both ends), and End Mount Block
- Tap holes as necessary
Fabricate Z Major Block
- Qty=1
Fabricate Z Mount Block
- Qty=1
- Mark all blind holes
Fabricate Spindle Block
- Qty=1
- Match the mounting thru holes with End Mount Block
- Tap holes as necessary
Fabricate End Mount Block
- Qty=1
- Mark all remaining blind holes
- Tap holes as necessary