Cold Saw/V1 Design Files/Interface Plate: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
=Interface Plate=
=Interface Plate=


*'''Length: 230mm'''
*'''Length: XXmm'''


*'''Width: 75mm'''
*'''Width: 127mm'''


*'''Thickness: 25mm'''
*'''Thickness: 25.4mm'''




*'''Drive Hole Diameter: 40mm'''


*'''Drive Hole Spacing Along Length: 70mm'''
*'''Drive Hole Diameter: 57.15mm'''


*'''Drive Hole Spacing Along Width: 40mm'''
*'''Drive Hole Spacing Along Length: 80mm'''


*'''Drive Hole Spacing Along Width: 63.5mm'''


*'''Motor Mount Hole Spacing Along Length: 20mm, 120mm'''


*'''Motor Mount Hole Spacing Along Width: 20mm, 60mm'''


*'''Motor Mount Hole: 12mm'''
*'''Motor Mount Hole Spacing Along Length: 30mm, 130mm'''


*'''Motor Mount Hole Spacing Along Width: 43.5mm, 83.5mm'''
*'''Motor Mount Hole Diameter: 10.5mm'''
*'''Motor Mount Hole Thread: M12x1.75'''
*'''Blade Guard Mount Hole Spacing Along Length: 30mm, 130mm'''
*'''Blade Guard Mount Hole Spacing Along Width: 23.5mm, 103.5mm
*'''Blade Guard Mount Hole Diameter: 10.5mm'''
*'''Blade Guard Mount Hole Thread: M12x1.75'''
*'''Interfacing Hole Spacing Along Length: XXmm, XXmm'''
*'''Interfacing Hole Spacing Along Width: 23.5mm, 103.5m'''
*'''Interfacing Hole Diameter: 10.5mm'''
*'''Interfacing Hole Thread: M12x1.75'''


*'''Interfacing Hole Spacing Along Length: 180mm, 210mm'''


*'''Interfacing Hole Spacing Along Width: 20mm, 60mm'''


*'''Interface Hole: M12'''
*'''2D Image'''
*'''2D Image'''


Revision as of 21:20, 24 May 2012

Interface Plate

  • Length: XXmm
  • Width: 127mm
  • Thickness: 25.4mm


  • Drive Hole Diameter: 57.15mm
  • Drive Hole Spacing Along Length: 80mm
  • Drive Hole Spacing Along Width: 63.5mm


  • Motor Mount Hole Spacing Along Length: 30mm, 130mm
  • Motor Mount Hole Spacing Along Width: 43.5mm, 83.5mm
  • Motor Mount Hole Diameter: 10.5mm
  • Motor Mount Hole Thread: M12x1.75


  • Blade Guard Mount Hole Spacing Along Length: 30mm, 130mm
  • Blade Guard Mount Hole Spacing Along Width: 23.5mm, 103.5mm
  • Blade Guard Mount Hole Diameter: 10.5mm
  • Blade Guard Mount Hole Thread: M12x1.75


  • Interfacing Hole Spacing Along Length: XXmm, XXmm
  • Interfacing Hole Spacing Along Width: 23.5mm, 103.5m
  • Interfacing Hole Diameter: 10.5mm
  • Interfacing Hole Thread: M12x1.75


  • 2D Image

ColdSawV1InterfacePlate.jpg

  • 3D CAD STP

File:ColdSawV1InterfacePlate.stp

  • 2D Fabrication Drawing PDF

File:ColdSawV1InterfacePlate.pdf

  • 2D Fabrication Drawing DXF

File:ColdSawV1InterfacePlate.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Interface_Plate&oldid=63532"