Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with "=Blade Guard= *'''Shape: Bent Flat Bar''' *'''Thickness: 1.5mm''' *'''Width: 76.2mm''' *'''Length: 580mm''' *'''Bend 90 degrees at 120mm''' *'''Bend 90 degrees at 460mm'''...") |
|||
| Line 7: | Line 7: | ||
*'''Width: 76.2mm''' | *'''Width: 76.2mm''' | ||
*'''Length: | *'''Length: 940mm''' | ||
*'''Bend 90 degrees at | *'''Outer Bend 90 degrees clockwise at 270mm''' | ||
*'''Bend 90 degrees at | *'''Outer Bend 90 degrees clockwise at 670mm''' | ||
*'''Mount Hole Spacing Along Width: | *'''Mount Hole Spacing Along Width: 38.1mm''' | ||
*'''Mount Hole Spacing Along Length: 20mm, | *'''Mount Hole Spacing Along Length: 20mm, 140mm, 800mm, 920mm''' | ||
*'''Mount Hole Diameter: | *'''Mount Hole Diameter: 12mm''' | ||
Revision as of 00:31, 25 May 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5mm
- Width: 76.2mm
- Length: 940mm
- Outer Bend 90 degrees clockwise at 270mm
- Outer Bend 90 degrees clockwise at 670mm
- Mount Hole Spacing Along Width: 38.1mm
- Mount Hole Spacing Along Length: 20mm, 140mm, 800mm, 920mm
- Mount Hole Diameter: 12mm