Cold Saw/V1 Design Files/Swivel Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
*'''Swivel Hole Diameter: 150mm''' | *'''Swivel Hole Diameter: 150mm''' | ||
*'''Swivel Hole Spacing Along Length: | *'''Swivel Hole Spacing Along Length: 270mm''' | ||
*'''Swivel Hole Spacing Along Width: 155mm''' | *'''Swivel Hole Spacing Along Width: 155mm''' | ||
| Line 17: | Line 17: | ||
*'''Support Hole Diameter: 12mm with 25mm dia 20 deep countersink''' | *'''Support Hole Diameter: 12mm with 25mm dia 20 deep countersink''' | ||
*'''Support Hole Spacing Along Length: | *'''Support Hole Spacing Along Length: 30mm, 85mm''' | ||
*'''Support Hole Spacing Along Width: 25.4mm, 155mm''' | *'''Support Hole Spacing Along Width: 25.4mm, 155mm''' | ||
Revision as of 20:55, 28 May 2012
Swivel Plate
- Length: 400mm
- Width: 310mm
- Thickness: 25.4mm
- Swivel Hole Diameter: 150mm
- Swivel Hole Spacing Along Length: 270mm
- Swivel Hole Spacing Along Width: 155mm
- Support Hole Diameter: 12mm with 25mm dia 20 deep countersink
- Support Hole Spacing Along Length: 30mm, 85mm
- Support Hole Spacing Along Width: 25.4mm, 155mm
- Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped
- Clamp Hole Spacing Along Length:
- Clamp Hole Spacing Along Width:
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF