Cold Saw/V1 Design Files/Swivel Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 25: | Line 25: | ||
*'''Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped''' | *'''Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped''' | ||
*'''Clamp Hole Spacing Along | *'''Clamp Hole Spacing Along Width: 190mm''' (Swivel Hole Spacing Along Width) | ||
*'''Clamp Hole Spacing Along | *'''Clamp Hole Spacing Along Height: 12.7mm''' (Swivel Plate Thickness / 2) | ||
Revision as of 16:15, 31 May 2012
Swivel Plate
- Length: 457.2mm
- Width: 304.8mm
- Thickness: 25.4mm
- Swivel Hole Diameter: 150mm
- Swivel Hole Spacing Along Length: 270mm
- Swivel Hole Spacing Along Width: 190mm
- Support Hole Diameter: 12mm with 25mm dia 8 deep countersink
- Support Hole Spacing Along Length: 30mm, 85mm
- Support Hole Spacing Along Width: 25.4mm, 190mm
- Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped
- Clamp Hole Spacing Along Width: 190mm (Swivel Hole Spacing Along Width)
- Clamp Hole Spacing Along Height: 12.7mm (Swivel Plate Thickness / 2)
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF