Cold Saw/V1 Design Files/Swivel Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
*'''Support Hole Diameter: 12mm with | *'''Support Hole Diameter: 12mm with 20mm dia 13 deep countersink''' | ||
*'''Support Hole | *'''Support Hole Rectangle: 30mm x 55mm''' | ||
*'''Support Hole Spacing | *'''Support Hole Rectangle Spacing: | ||
Revision as of 20:32, 4 June 2012
Swivel Plate
- Length: 457.2mm
- Width: 304.8mm
- Thickness: 25.4mm
- Swivel Hole Diameter: 153mm
- Swivel Hole Spacing Along Length: 335mm
- Swivel Hole Spacing Along Width: 190mm
- Support Hole Diameter: 12mm with 20mm dia 13 deep countersink
- Support Hole Rectangle: 30mm x 55mm
- Support Hole Rectangle Spacing:
- Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped
- Clamp Hole Spacing Along Width: 190mm (Swivel Hole Spacing Along Width)
- Clamp Hole Spacing Along Height: 12.7mm (Swivel Plate Thickness / 2)
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF