Cold Saw/V1 Design Files/Drive Collar: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
*'''Setscrew Hole Diameter: 10.5mm Thru 1 Side, M12x1.75 tap''' | *'''Setscrew Hole Diameter: 10.5mm Thru 1 Side, M12x1.75 tap''' | ||
*''' | *'''Radial Setscrew Hole Spacing Along Length: 13mm''' | ||
*''' | *'''Axial Setscrew Hole Spacing From Center: 27mm''' | ||
Latest revision as of 18:22, 5 June 2012
- Outside Diameter: 76.2mm
- Inside Diameter: 32mm
- Length: 25.4mm
- Setscrew Hole Positioning: 4 on end face, 4 on round face, equidistant and not interfering with each other.
- Setscrew Hole Diameter: 10.5mm Thru 1 Side, M12x1.75 tap
- Radial Setscrew Hole Spacing Along Length: 13mm
- Axial Setscrew Hole Spacing From Center: 27mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF