Cold Saw/V1 Design Files: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
| Line 107: | Line 107: | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate Baseplate] | [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate Baseplate] | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/ | [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Block Base Block] | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Bar Base Bar] | |||
=Vise System= | =Vise System= | ||
Revision as of 20:50, 11 June 2012
Uniform Part Dimensions
- Plate: 25.4mm x 304.8mm (Base Plate, Swivel Plate)
- Flat Bar: 76.2mm x 50.8mm (Shaft Block, Fixed Block, Moving Block)
- Flat Bar: 25.4mm x 127mm (Support Bar, Bridge Bar, Interface Bar, Vise Jaw)
- Flat Bar: 3.175mm x 25.4mm (Blade Guard Support)
- Flat Bar: 1.6mm x 152.4mm (Blade Guard)
- Round Bar: 152.4mm DIA (Base Disc)
- Round Bar: 127mm DIA (Blade Mount Disc)
- Round Bar: 76.2mm DIA (Shaft Collar with Axial Tensioning, Large Thrust Washer)
- Round Bar: 50.8mm DIA (Shaft Coupling, Shaft Collar)
- Round Bar: 31.8mm DIA (Shaft, Operation Handle, Vise Handle)
- Round Bar: 8mm DIA (Small Rod)
- Setscrew: M8x1.25 THREAD
- Bolts and Nuts: M12x1.75 THREAD
- Threaded Rod: M30x3.5 THREAD
- Nuts: M30x3.5 THREAD
Uniform Mounting Dimensions
- Swivel Mechanism
Base Disc Mounting Rectangle Sides: 60mm x 80mm
- Vise Mechanism
Vise Mounting Rectangle Sides: 50mm x 90mm
Center-to-Center Distance Between Vise Shaft and Threaded Rod: 95mm
- Rotary Support Mechanism
Shaft Block Mounting Rectangle Sides: 30mm x 55mm
- Drive Mechanism
Interface Mounting Rectangle Sides: 75mm x 80mm
Hydraulic Motor Mounting Rectangle Sides: 40mm x 100mm
- Blade Guard
Center-to-Center Distance between Blade Guard Support Screws: 100mm