Cold Saw/V1 Design Files/Base Flat: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
*'''Width: 127mm''' | *'''Width: 127mm''' | ||
*'''Length: | *'''Length: 600mm''' | ||
*'''Base Hole Diameter: 12mm with 20mm DIA 13 DEEP counterbore''' | *'''Base Hole Diameter: 12mm with 20mm DIA 13 DEEP counterbore''' | ||
*'''Base Hole Rectangle: 80mm x | *'''Base Hole Rectangle: 80mm x 520mm''' | ||
*'''Base Hole Rectangle Positioning: Centered''' | *'''Base Hole Rectangle Positioning: Centered''' | ||
Revision as of 22:27, 15 June 2012
- Thickness: 25.4mm
- Width: 127mm
- Length: 600mm
- Base Hole Diameter: 12mm with 20mm DIA 13 DEEP counterbore
- Base Hole Rectangle: 80mm x 520mm
- Base Hole Rectangle Positioning: Centered
- Vise Hole Diameter: 10.5mm then M12x1.75 Tap
- Vise Hole Rectangle: 50mm x 90mm
- Vise Hole Rectangle Positioning: Centered
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF