Mini Wire Reel: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The concept is to have an aluminum round bar/tube(1" dia ex) then drill a thru hole (5mm dia ex) near each end.") |
No edit summary |
||
| Line 1: | Line 1: | ||
Source some aluminum round bar and some thin rope | |||
[https://www.amazonsupply.com/dp/B000H9FWNY/ref=sp_dp_g2c_asin Source: 1" Diameter, 72" Length, 6061T6 Aluminum Round Bar] | |||
Cut it to length (ex. 100mm) | |||
Drill two 6mm diameter holes; 1 hole spaced 10mm from the end and 1 hole spaced 60mm from the same end. | |||
Revision as of 01:32, 27 August 2012
Source some aluminum round bar and some thin rope
Source: 1" Diameter, 72" Length, 6061T6 Aluminum Round Bar
Cut it to length (ex. 100mm)
Drill two 6mm diameter holes; 1 hole spaced 10mm from the end and 1 hole spaced 60mm from the same end.