PowerCube Wiring: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) (Created page with "===Wiring=== * The keyswitch has spade connectors for wiring and bolts to the frame for stability. These should be connected with matching crimp-on connectors. ::[[Image:keyswit...") |
No edit summary |
||
| Line 4: | Line 4: | ||
* Connect the remaining wires, as in the diagram below: | * Connect the remaining wires, as in the diagram below: | ||
::[[Image:wiringdiagram.png]] | ::[[Image:wiringdiagram.png]] | ||
[http://www.stens.com/images/catalog2/430-249_2_C.jpg Wiring Diagram for Prime Line SBRAI ignition switch] | |||
* Note that the thicker lines represent the heavier wires that will carry high electrical current. | * Note that the thicker lines represent the heavier wires that will carry high electrical current. | ||
Revision as of 22:49, 12 October 2012
Wiring
- The keyswitch has spade connectors for wiring and bolts to the frame for stability. These should be connected with matching crimp-on connectors.
- Connect the remaining wires, as in the diagram below:
Wiring Diagram for Prime Line SBRAI ignition switch
- Note that the thicker lines represent the heavier wires that will carry high electrical current.