Modular Stove Fabrication Procedure: Difference between revisions
Jump to navigation
Jump to search
(→Step 2) |
(→Step 2) |
||
| Line 12: | Line 12: | ||
*Cut angle for 2 mitered frames, just like for [[Power Cube 6]]. | *Cut angle for 2 mitered frames, just like for [[Power Cube 6]]. | ||
[[Image:Miteredframe.png|300px]] | |||
**Use Ironworker for mitered cuts: | **Use Ironworker for mitered cuts: | ||
<html></html> | <html></html> | ||
**Result: corners fit together such that all metal angle form flat planes | **Result: corners fit together such that all metal angle form flat planes | ||
[[Image:mitered.jpg|300|Mitered corners with 2"x2" angle | |||
===Quality Control=== | ===Quality Control=== | ||
*3 corners fit so there is no more than 1/8" space anywhere | *3 corners fit so there is no more than 1/8" space anywhere | ||
| Line 21: | Line 22: | ||
<html><iframe width="300" height="225" src="https://www.youtube.com/embed//Ep1vu0szOZ4" frameborder="0" allowfullscreen></iframe></html> | <html><iframe width="300" height="225" src="https://www.youtube.com/embed//Ep1vu0szOZ4" frameborder="0" allowfullscreen></iframe></html> | ||
Then, the build: | Then, the build: | ||
Revision as of 23:14, 16 October 2012
BOM
Start with BOM.
Build
Step 1
Study Concept: 2 boxes with slideable cover plates clamped down. Ash tray and flame deflector plates side in similar fashion.
Step 2
- Cut angle for 2 mitered frames, just like for Power Cube 6.
- Use Ironworker for mitered cuts:
- Result: corners fit together such that all metal angle form flat planes
[[Image:mitered.jpg|300|Mitered corners with 2"x2" angle
Quality Control
- 3 corners fit so there is no more than 1/8" space anywhere
- length of members within 1/4" tolerance
Then, the build:
Step 3