Power Cube IV: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
(Replaced content with "The version found in the Civilization Starter Kit v0.01 is prototype IV - see Civilization_Starter_Kit_DVD_v0.01#Power_Cube.")
Line 1: Line 1:
The plans on the OSE website are for version 4, but it is under renovation.
The version found in the [[Civilization Starter Kit v0.01]] is prototype IV - see [[Civilization_Starter_Kit_DVD_v0.01#Power_Cube]].
I just completed version 5 (just delivered to Marcin) and am about to begin on version 6.
 
Version 6 will include several updates:
*28 HP engine
*Larger 7 gallon fuel tank
*Symmetric fuel/hydraulic tanks
*Simplified engine mounting and access to pump & coupling
*Thermostatically controlled oil cooling fan
*Rubber vibration mounts for engine
*Commercial muffler
*Control / hydraulic panel
 
[[Image:pc6.jpg]]
 
Here are my best answers to your questions - using Power Cube 6:
 
*Weight: Approx 150 lbs dry.  Hydraulic oil and fuel can add up to 100 lbs (14 gallons @ 7.3 lbs/gallon).
*Dimensions: 27" x 27" x 27" cube
*CG: If you mean "Center of Gravity", no data on this yet, but it will vary with fluid distribution in the tanks
*Duration: No data yet, as we are using a new engine.  This also depends on power usage.
*Fuel: 7 Gallons
 
Notes:
*The power is delivered via hydraulic fluid power through the quick coupler connectors. 
*The Power cube attaches to the LifeTrac with the quick attach plates - which are at 45 degrees.
*I would like to add remote controls to the Power Cube via electronic interface, but haven't started on this yet.  This will be very important for remote throttle, start & stop.
*I have discussed with Marcin the possibility of working on a "MicroTrac" walk-behind two wheel tractor that would be like a LARGE, powerful tiller.  I envision it to employ the Power Cube for power.  It could be just a drive train from a car.
*I have also discussed with Marcin the possibility of splitting the Power Cube into two the engine and drive components, where the engine could be detached from the hydraulic pump via a quick connect shaft coupling.  The engine could then be connected to something else (like a car?) for direct drive power.  This one is still in the concept phase, but seems reasonable.  The key component would be the shaft coupling.  Its components would have to be re-arranged, as the engine component could not rely on the presence of the hydraulic tank for support.
 
[[Category:Power Cube]]
[[Category:Tom Griffing]]

Revision as of 23:53, 23 October 2012

The version found in the Civilization Starter Kit v0.01 is prototype IV - see Civilization_Starter_Kit_DVD_v0.01#Power_Cube.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Power_Cube_IV&oldid=77846"