CNC Torch Table 1: Difference between revisions
Jump to navigation
Jump to search
(Created page with "==CNC Torch Table Prototype I== *Prototyped and Tested in experimental production runs. *Identified software toolchain as a performance bottleneck. =Systems Engineering Breakdow...") |
No edit summary |
||
| Line 1: | Line 1: | ||
==CNC Torch Table Prototype I | First Fire: | ||
<html><iframe src="https://player.vimeo.com/video/23785186" width="500" height="291" frameborder="0" webkitAllowFullScreen mozallowfullscreen allowFullScreen></iframe></html> | |||
=CNC Torch Table Prototype I= | |||
*Prototyped and Tested in experimental production runs. | *Prototyped and Tested in experimental production runs. | ||
*Identified software toolchain as a performance bottleneck. | *Identified software toolchain as a performance bottleneck. | ||
Revision as of 00:58, 21 November 2012
First Fire:
CNC Torch Table Prototype I
- Prototyped and Tested in experimental production runs.
- Identified software toolchain as a performance bottleneck.
Systems Engineering Breakdown Diagram
The following diagram takes all of the separate components that make up the CNC Torch Table, and spacially organizes them to display dependancy and possible bottlenecks for troubleshooting.
Design Rationale
The following points have been considered throughout Torch Table development.
- Rigid design to maximize precision
- Perfect mechanical design for replicability to 1/32" over 5.5' x 11.5' area
- Ability to cut 20 feet long 4" square tube.
- Ability to cut 10 feet long 6" square tube. (without removal of vertical slats)
- Ability to cut 10 feet long 10" square tube. (with removal of vertical slats)