File:Stock Pivot Plate.skp: Difference between revisions
Jump to navigation
Jump to search
Samthetechie (talk | contribs) (Stock_Pivot_Plate.skp updated part of Backhoe_Boom_in_Sketchup) |
Samthetechie (talk | contribs) (Samthetechie uploaded a new version of "File:Stock Pivot Plate.skp": This files addresses these points: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a little too lar) |
(No difference)
|
Revision as of 23:33, 18 May 2013
Stock_Pivot_Plate.skp updated part of Backhoe_Boom_in_Sketchup
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Dimensions | User | Comment | |
---|---|---|---|---|
current | 03:39, 19 May 2013 | (133 KB) | Samthetechie (talk | contribs) | adjusted 3" hole position as per feedback from Marcin. |
23:33, 18 May 2013 | (136 KB) | Samthetechie (talk | contribs) | This files addresses these points: 1. All the nominal 1" Holes should be 1-1/16" - this gives a little play for 1" bolts to slip through easily. 1-1/8" is a little too large. 2. The pivot plate should have 6 of the 1" holes, and the big hole should b... | |
21:56, 18 May 2013 | (131 KB) | Samthetechie (talk | contribs) | Stock_Pivot_Plate.skp updated part of Backhoe_Boom_in_Sketchup |
You cannot overwrite this file.
File usage
The following 3 pages use this file: