Samthetechie log: Difference between revisions
Jump to navigation
Jump to search
Samthetechie (talk | contribs) m (→Output: changing order of skp files) |
Samthetechie (talk | contribs) (→Input: added new file File:Stock_Pivot_Plate_3_inch_hole.skp and screenshot Image:Stock_Pivot_Plate_3_inch_hole.jpg) |
||
| Line 3: | Line 3: | ||
=Tues, May 21, 2013= | =Tues, May 21, 2013= | ||
==Input== | ==Input== | ||
*[[File:Stock_Pivot_Plate.skp]] | |||
*Feedback from [[User:Marcin]] about [[File:Backhoe.skp]] | *Feedback from [[User:Marcin]] about [[File:Backhoe.skp]] | ||
To generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole, not a 4.875" hole and ensure hole is correct for 3d printed files. | |||
*New pivot plate [[File:Stock_Pivot_Plate_3_inch_hole.skp]] should address feedback from [[User:Marcin]] about the 3" pivot hole? | |||
Is the spacing / layout ok? If so I will update the rest of the models accordingly. | |||
[[Image:Stock_Pivot_Plate_3_inch_hole.jpg|600px]] | |||
'''Note: the above is used to generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole''' | |||
==Ouput== | ==Ouput== | ||
Revision as of 00:48, 22 May 2013
see Work Log for howto.
Tues, May 21, 2013
Input
- File:Stock Pivot Plate.skp
- Feedback from User:Marcin about File:Backhoe.skp
To generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole, not a 4.875" hole and ensure hole is correct for 3d printed files.
- New pivot plate File:Stock Pivot Plate 3 inch hole.skp should address feedback from User:Marcin about the 3" pivot hole?
Is the spacing / layout ok? If so I will update the rest of the models accordingly.
Note: the above is used to generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole
Ouput
- Updated File:Backhoe.skp with new 'mouse ear' Stock_Pivot_Plate
- File:12 foot stock 4 inch square tube with half inch walls.skp
- File:11 foot stock 4 inch square tube with half inch walls.skp
- File:10 foot stock 4 inch square tube with half inch walls.skp
- File:9 foot stock 4 inch square tube with half inch walls.skp
- File:8 foot stock 4 inch square tube with half inch walls.skp
- File:7 foot stock 4 inch square tube with half inch walls.skp
- File:6 foot stock 4 inch square tube with half inch walls.skp
- File:5 foot stock 4 inch square tube with half inch walls.skp
- File:4 foot stock 4 inch square tube with half inch walls.skp
- File:3 foot stock 4 inch square tube with half inch walls.skp
- File:2 foot stock 4 inch square tube with half inch walls.skp
- File:1 foot stock 4 inch square tube with half inch walls.skp
Sat, May 18, 2013
- Progress on 18th: Working on sketchup models for OSE-OSHW-Dev-Backhoe
Input
- explanation and orientation from marcin about the Backhoe.
- shown key documents/resources:
- Backhoe dev page: OSE-OSHW-Dev-Backhoe
- Backhoe sketchup models in a zip file: Backhoe_Boom_in_Sketchup (my starting point for the day in terms of sketchup source files).
- Backhoe Prior Art
Output
- File:Stock Bonding Plate 8 inches x 16 inches.skp
- File:Stock Spacer Plate 8 inches x 8 inches.skp
- File:Backhoe.skp
- note 5/21/13 - needs updating to mickey mouse. DONE see new upload to File:Backhoe.skp (note the 4.875" pivot hole is still present)
- note 5/21/13 - then to 3" pivot hole for rapid prototyping / 3d printing rather than 4.875" as per explanation on Stock_Pivot_Plate