Samthetechie log

see Work Log for howto.

Sat, May 25, 2013

• Wrote a quick guide for Sketchup_on_Linux
• Reviewing recent changes and latest OSE-OSHW-Dev-Backhoe

Tues, May 21, 2013

Input

• File:Stock Pivot Plate.skp
• Feedback from User:Marcin about File:Backhoe.skp

To generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole, not a 4.875" hole and ensure hole is correct for 3d printed files.

• New pivot plate File:Stock Pivot Plate 3 inch hole.skp should address feedback from User:Marcin about the 3" pivot hole?

Is the spacing / layout ok? If so I will update the rest of the models accordingly.

Note: the above is used to generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole

Ouput

• Updated File:Backhoe.skp with new 'mouse ear' Stock_Pivot_Plate
• File:12 foot stock 4 inch square tube with half inch walls.skp
  • 
• File:11 foot stock 4 inch square tube with half inch walls.skp
• File:10 foot stock 4 inch square tube with half inch walls.skp
• File:9 foot stock 4 inch square tube with half inch walls.skp
• File:8 foot stock 4 inch square tube with half inch walls.skp
• File:7 foot stock 4 inch square tube with half inch walls.skp
• File:6 foot stock 4 inch square tube with half inch walls.skp
• File:5 foot stock 4 inch square tube with half inch walls.skp
• File:4 foot stock 4 inch square tube with half inch walls.skp
• File:3 foot stock 4 inch square tube with half inch walls.skp
• File:2 foot stock 4 inch square tube with half inch walls.skp
• File:1 foot stock 4 inch square tube with half inch walls.skp

Sat, May 18, 2013

• Progress on 18th: Working on sketchup models for OSE-OSHW-Dev-Backhoe

Input

• • explanation and orientation from marcin about the Backhoe.
  • shown key documents/resources:
    • Backhoe dev page: OSE-OSHW-Dev-Backhoe
    • Backhoe sketchup models in a zip file: Backhoe_Boom_in_Sketchup (my starting point for the day in terms of sketchup source files).
    • Backhoe Prior Art

Output

• File:Stock Pivot Plate.skp

• File:Stock Bonding Plate 8 inches x 16 inches.skp
• File:Stock Spacer Plate 8 inches x 8 inches.skp
• File:Backhoe.skp
  • note 5/21/13 - needs updating to mickey mouse. DONE see new upload to File:Backhoe.skp (note the 4.875" pivot hole is still present)

• • note 5/21/13 - then to 3" pivot hole for rapid prototyping / 3d printing rather than 4.875" as per explanation on Stock_Pivot_Plate