50 hp Power Cube: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) (→CAD) |
Tom Griffing (talk | contribs) (→CAD) |
||
| Line 7: | Line 7: | ||
Note: This model shows a cooler that was used for the prior 28 hp power cube. For updated cooler information see the following link: | Note: This model shows a cooler that was used for the prior 28 hp power cube. For updated cooler information see the following link: | ||
[http://opensourceecology.org/wiki/Hydraulic_Cooler_Sizing#Selecting_a_Cooler | [http://opensourceecology.org/wiki/Hydraulic_Cooler_Sizing#Selecting_a_Cooler Selecting A Cooler] | ||
[[Image:pc50guts.jpg|400px]] | [[Image:pc50guts.jpg|400px]] | ||
Revision as of 01:56, 3 June 2013
CAD
Download Sketchup - File:Pc50.zip
Note: This model is a first attempt at framing a Volkswagen engine in a Power Cube. The pumps shown are crude models of triple pumps for powering three independent hydraulic circuits for a LifeTrac.
Note: This model shows a cooler that was used for the prior 28 hp power cube. For updated cooler information see the following link: Selecting A Cooler
