Modulegenerator.fcstd ‎(file size: 199 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes

(newest on top)

01:06, 5 May 2023 to 01:26, 5 May 2023 seems corrupt. Reverted to 01:00, 5 May 2023 and saved that with a correction on Header Separation.
15:56, 30 April 2023 added top and first stud
Next iteration must be in the XY plane but height must be in the Z direction.
14:07, 27 April 2023 was started in the XY plane with height of modules in the Y direction. That does not work for roation around z.

File history

Click on a date/time to view the file as it appeared at that time.

Date/Time	Dimensions	User	Comment
07:48, 2 May 2023	(81 KB)	Marcin (talk \| contribs)	Fixed trim parametrization to absolute from 0. Relative to another point kept messing up.
07:20, 2 May 2023	(82 KB)	Marcin (talk \| contribs)	Added cripples.
07:12, 2 May 2023	(79 KB)	Marcin (talk \| contribs)	Adding cripples toggled by existence of special door module.
07:02, 2 May 2023	(77 KB)	Marcin (talk \| contribs)	Lowered door header if first floor modules.
06:30, 2 May 2023	(78 KB)	Marcin (talk \| contribs)	Fixed jackstud location 2 for custom doors, moving to cripples.
06:27, 2 May 2023	(78 KB)	Marcin (talk \| contribs)	Improving parameters. One dimension keeps jumping to outside instead of inside of a stud.
06:05, 2 May 2023	(75 KB)	Marcin (talk \| contribs)	Added top bar for bifold door.
05:52, 2 May 2023	(72 KB)	Marcin (talk \| contribs)	adding top 1x6 trim
05:39, 2 May 2023	(64 KB)	Marcin (talk \| contribs)	Adding 1x6 trim
05:13, 2 May 2023	(64 KB)	Marcin (talk \| contribs)	Adding toggle for door trim.

You cannot overwrite this file.

The following 3 pages use this file: