Unibase2.fcstd ‎(file size: 96 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Notes (Newest on Top)

Updated at 16:28, 11 August 2020
Final enlarged holes and chamfered holes - Gitlab - [1]
Gitlab - [2] - has all the chamfers, which take 3 MB. File for printing.
Note - 11:56, 31 July 2020 has the 0,6 mm widened hole - the Gitlab version has the narrower hole. Thus, the file here is the authoritative last version for printing.
Update - https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/finished_base_2.fcstd
Full file of 14:20, 26 July 2020 is at https://gitlab.com/marcin_ose/d3d-universal-v2/-/blob/master/finished__base.fcstd
You can regain full base from test print file by removing the cuts from version 20:31, 24 July 2020

File history

Click on a date/time to view the file as it appeared at that time.

Date/Time	Dimensions	User	Comment
20:22, 26 July 2020	(86 KB)	Marcin (talk \| contribs)	Deepened Z axis bolt hole to 20 mm.
19:20, 26 July 2020	(84 KB)	Marcin (talk \| contribs)	Dumb object of finished file ready for test print.
18:58, 26 July 2020	(979 KB)	Marcin (talk \| contribs)	Update of hole next to z motor.
18:38, 26 July 2020	(978 KB)	Marcin (talk \| contribs)	With controller mount holes
18:24, 26 July 2020	(857 KB)	Marcin (talk \| contribs)	Base without front holes.
00:22, 26 July 2020	(348 KB)	Marcin (talk \| contribs)	Modified controller compartment.
03:25, 25 July 2020	(50 KB)	Marcin (talk \| contribs)	Z mount test
01:31, 25 July 2020	(144 KB)	Marcin (talk \| contribs)	Test print file by cutting parts off outside LCD/controller mount.
01:28, 25 July 2020	(446 KB)	Marcin (talk \| contribs)	Updated with mounting holes for LCD and mounting for controller.
02:21, 17 July 2020	(36 KB)	Marcin (talk \| contribs)

You cannot overwrite this file.

The following page uses this file: