Eric Potash Log

From Open Source Ecology
Revision as of 03:01, 15 March 2014 by Saucerful (talk | contribs)
Jump to navigation Jump to search

Thu Mar 12, 2014

Adapted rotor shaft to coupler (keyway and setscrews). Adjusted spacing of tine modules to put 3" between neighboring tine ends and 3½" to bucket sides. Adjusted length of shaft to accomodate coupler, bearings and collar. See File:Rotor.scad.

Exported File:Rotor.stl including to integrate with SketchUp. See OpenSCAD#Import scaling.

Wed Mar 12, 2014

Minor changes to tine_module in File:Rotor.scad.

Tine module.png

Worked through exporting from OpenSCAD to STL (e.g. File:Tine module.stl) and importing results in SketchUp. Documented the process in OpenSCAD#Collaboration. Continued limewashing and painting the HabLab.

Tue Mar 11, 2014

Modeled rotor in scad: File:Rotor.scad. Limewashed the HabLab.

Rotor.png

Mon Mar 10, 2014

Worked on Soil Mixer Drawing. Mixed and applied first layer of plaster in MicroHouse. Modeled tractor interface in openscad File:Tractor interace.scad and exported stl File:Tractor interace.stl.

Tractor interface.png

Sun Mar 9, 2014

Brainstormed Soil Mixer Design Requirements. Stripped plaster in MicroHouse and put up chicken wire. Modeled the OSE grid beam in openscad File:Grid beam.scad.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Eric_Potash_Log&oldid=116873"