Mathias log

Sat August 2, 2014

Midnight welding lessons with Devin

talked with Marcin about setting up a skype-conference with my professor about CAD-design assistance from JKU students

solenoid valves have to be opencentered which Marcin didn't tell me when first giving me the assignment and kills my previous designs which are closed centered

Fri August 1, 2014

built another picnic table with Michal

Thu July 31, 2014

Worked on MicroHouse 3 Foundation

built another picnic table as to this design: picnic table

Wed July 30, 2014

Worked on MicroHouse 3 Foundation

talked with Marcin about a small collaboration between my university JKU Linz and ose ose can provide small design projects, students will design parts and make CAD-models as part of a course

Tue July 29, 2014

Arrived at FeF

Thu May 01, 2014

Made some sketches for the valves.

Posted results here

Sun Apr 27, 2014

Marcin asked me to start designing openSource solenoid_valves for 30 gallon per min at 3000 psi pressure.

Started research on the matter. Electrical controlled valves are necessary in order to remote-control machines from the GVCS. However, the solenoid valves for the power level of interest cost about $300 per double-acting channel. There is thus A strong case for open source solenoid valves, which we could produce for probably 1/5 of that cost.