3D Printed Chuck

From Open Source Ecology
Revision as of 21:01, 6 January 2019 by Eric (talk | contribs) (Added some thoughts of mine)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • A decent chuck can be 3D printed for low force applications - [1] (Strength of this design probably could be greatly improved with a good nylon or polycarbonate (maybe even composite with carbon fiber) 3d printing filament. Tempering the parts after printing may help too. -Eric)
  • See a drill chuck - with a push drill - [2]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=3D_Printed_Chuck&oldid=184073"