Flexible Build Plate

• 120C - [1]
• 80C - [2]
• Magnetic plate for 105C is cheap, but textured spring steel PEI surface is not at $30 minimum - [3] - + PEI spring steel sheet - [4]
• 6x6" spring steel is $2 for 6"x6" sheet - [5]

Notes

• Buildtak does not provide enough adhesion for ABS without heat - [6]
  • But it recommends no heat with PLA
  • User review says works without heat all the time for PLA and PETG - [7]
• Spring steel plate is cheap at $3 for a 6"x6" plate from Amazon, 0.01" thick - [8]
• 0.012" or 0.3 mm thick is $2 for a 6x6" plate at McMaster. [9]. Printerware is 0.6 mm - [10]

PEI and No Heat

• Plenty of use cases for using PEI without heat - [11]

PEI

• 0.5 mm is available - [12]
• 0.8 mm is available - [13]