December 2019 Production Run

1. 40 heat sinks for fan - [1]
2. 30 heater cartridges - [2]
3. 30 thermistors - [3]
4. 40 plugs - [4]
5. 1000 feet of ga 26 nichrome - [5]
6. 2mm fiberglass sleeve - 30 meters - [6] + 10 m of 6mm
7. 30 SD Cards - [7]
8. 22 SSRs - [8]
9. 30 PEI - [9]
10. 30 fans 24v - [10]
11. 30 blowers 24v- [11]
12. 200 pulleys - [12]
13. 200M GT2 belt - (40 machines) [13]
14. 40 sensors - [14]
15. 205 motors - [15]
16. 10 SD cards - [16]
17. 5 GFCIs - [17]
18. 20 GFCIs - [18]
19. 24 controllers - [19]
20. 30 heatbreaks each of 1.75 and 3 - [20]
21. 30 socks - v2 - [21]
22. 30 nozzles each of 1.75 - of each 4, 6, 8, 10, 12 - [22]
23. 30 nozzles each of 3.0 - 4, 6, 8, 10 - [23]
24. 36 heater blocks, v2 volcano - [24]
25. 300' of Nichrom wire - [25]
26. 30 power supplies from - [26]
27. 144 endstops - [27]
28. 5 sheets of double sided tape - [28]

• 120 linear bearings - [29]. Think of printing these, as this is just for 10
• 300 flanged bearings - [30]
• 30 Volcano Heater Blocks - [31]
• 2 Supervolcano nozzles - 0.5 mm for 1.75 filament - [32]
• 3mm TPU - [33]