Minimalist Arduino

• Variation on dead-bug soldering from [1] fo make a functional arduino:

Assessment

For this to be functional:

• We need a source of clean 5V power such as a computer or USB power supply (USB B). This is easy.
• We need to connect to specific pins. Yes, this is doable simply by using female Dupont wire directly connected to the pins of the chip.
• For this to be programmed, we need a USB to serial interface, which this doesn't appear to include. However, we can program this chip by inserting into another Arduino Uno.

Thus, this would completely work to control things when powered up, such as a minimalist CEB Press. This could be a great apocalyptic option if one had components but no circuit boards/proto boards of any type to solder/plug onto.

Further Simplification

The absolute simplest option for a functional Arduino appears to be:

1. USB B port - to plug into ubiquitous USB ports using a USB A to USB B male-male cable
2. Atmega 328P chip
3. 2 wires from USB port to power up the chip.
4. Crystal oscillator on pins 9 and 10, with 22 pf capacitors to pins 9 and 10

That's it! To connect to outputs or inputs - use Dupont wire.