Open Source In-Line Duct Fan
Jump to navigation
Jump to search
Basics
- A Fan powered by a Brushless DC Motor that is placed in-line with Ductwork to propel the air
- Use One Per Zone, and thus allow for a per zone Variable Air Flow system (also software control of all the rates etc
- Need to see if "blast gates" would still be needed/useful
- Main use is in an HVAC or solely Ventilation system for a building, but it would also have use for greenhouses, and fume hoods/laminar flow hoods etc
Internal Links
External Links
- A Article on "Duct Boosters" vs "Inline Fans" (both good amazon search terms etc)