CNC Torch Table v21.08 3D CAD

https://github.com/AmunRa1322/OpenSourceEcology_Files

Working Doc

(repeated from Conceptual Design section)

edit

Part Library

• 

  File:Finalcnctorchassy.fcstd CNC Torch Table assembly.

• 

  File:1inchcollar.fcstd. File:1inchcollar.stl. 1" shaft clamp, self threading. Drill out one side.

• 

  File:Cablechainlarge.fcstd. File:Cablechainlarge.stl. Cable Chain.

• 

  File:Cncttzaxis.fcstd CNC torch table Z axis.

• 

  File:Halfbearingholder.fcstd. Half bearing holder. File:Halfbearingholder.stl

• 

  File:Y2axis.fcstd Y2 axis.

• 

  File:X1axis.fcstd X1 axis.

• 

  File:1autoparallel.fcstd Auto parallel mechanism. File:1autoparallel.stl

• 

  File:Y1axis.fcstd Y1 axis.

• 

  File:Carriageassy.fcstd Carriage assembly.

• 

  File:Torch tip.fcstd Torch Handle.

• 

  File:Torch handle only.fcstd Torch Handle.

• 

  Igniter for acetylene cut torch
  FreeCAD - File:Igniter.fcstd

• 

  EM valve for acetylene and oxygen
  FreeCAD - File:Fl 205 cut of solenoid.fcstd

• 

  CNC Torch Frame. File:Cnctorchframe.fcstd.

• 

  Gitlab Source. Newer version is in FreeCAD - File:Newquickmotor.fcstd. STL file - File:Motorpiece1in.stl. New gcode at gitlab - [1]

• 

  Separate carriage piece. File:Carriageseparate.fcstd. File:Carriageseparate.stl

• 

  Motor to Idler Converter Plug. File:Motortoidler.fcstd. For printing - File:Motortoidler.stl

• 

  New 1" idler assembly. File:Newidler1nch.fcstd. Note that the idler is made by taking the motor piece and adding an insert to create the idler function. Thus, the 3D printed piece is the same as the motor piece - plus an insert (the Motor to Idler Converter Plug. 2 bearings go in as well, on an 8 mm shaft.

• 

  608 skateboard 8x22x7 mm Bearing. Download - File:608Bearing.FCStd

• 

  Torch head assembly. FreeCAD file on Gitlab - [2]

• 

  CNC Torch Table Belt Pinch. - FreeCAD -File:CNC Torch Belt Pinch.stl.

• 

  CNC Torch Table Carriage. - FreeCAD -File:CNC Torch Table Carriage.fcstd. File:Carriage1.stl. Latest update on Gitlab - [3]

• 

  CNC Torch Table Idler. - FreeCAD -File:CNC Torch Table idler2.FCStd - stl - File:CNC Torch Table Idler5.stl. Updated 10/1/21 idler on Gitlab - [4]

• 

  File:Nema23motor.fcstdNema 23 motor.

• 

  File:Bearing 1in.fcstd

Gcode for Marlin Universal v20.04, running on D3D Universal v3

• File:Motor1in.gcode
• File:Carriage1in.gcode
• File:Idler1in.gcode

More

• Bed Hold - . File:Bedhold.fcstd. File:Bedhold.stl - note - needs update for extra chamfer. Use latest FreeCAD file.
• Rod Test File with bushing - File:1inchrodtest.fcstd. With bushing it is 1.25". Add 0.1" to make it 1.35" diameter. STL - File:1inchrodtest.stl
• Rod Test File without bushing - File:1inchrodtestnobushing.fcstd. General rule: add 0.1" to diameter for 1.2mm nozzles. D=1.1"
• Rod spacing template - 1/8" by 3.5" full hole - File:Spacingtemplate.fcstd
• Test file for outside holes - File:Outsideholes.fcstd
• Bushing template - File:1inchbushingtest.fcstd

Links

• CNC Torch Table v21.08