CNC Torch Table v21.08 Data Collection

Motion Force

• At half inch cutting speeds of 20 ipm or 500 mm/min - this is prior to pulley size calibration of about 30% larger pulley
• 11/12/21 gets us 25 lb towards negative y1, 20+ for both directions of y2, and 20+ lb for both directions of x
• Positive y1

Speeds Achievable

• 11/12/21 gets us to 3000 mm/min. Above starts to skip.

More

• Actual initial speed prior to calibration. - 1m/2min = or 0.5 m/min or 20 IPM
• 889 Y limit
• actual motion 26.5 in = 673 mm

• 63.5/80*889=