Mount Wheels

From Open Source Ecology

Revision as of 01:49, 19 June 2011 by Marcin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Prepare wheel mounting plates, 4 per tractor - 1/2"x8"x10"
Download CAM files for wheel plates -[1]
Configure LinuxCNC
Torch out plates (or cut by hand)
Cut gussets - right angle triangles with 4" legs - 4 per wheel
Weld gussets onto plates

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Mount_Wheels&oldid=31621"

Fabrication Procedures