Cold Saw/V1 Design Files/Swivel Plate

From Open Source Ecology

< Cold Saw‎ | V1 Design Files

Revision as of 20:50, 28 May 2012 by YK (talk | contribs) (→‎Swivel Plate)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Swivel Plate

Length: 400mm

Width: 310mm

Thickness: 25.4mm

Swivel Hole Diameter:

Swivel Hole Spacing Along Length: 250mm

Swivel Hole Spacing Along Width: 155mm

Support Hole Diameter: 12mm with 25mm dia 20 deep countersink

Support Hole Spacing Along Length: 10mm, 65mm

Support Hole Spacing Along Width: 25.4mm, 155mm

Clamp Hole Diameter: 10.5mm dia, then M12x1.75 tapped

Clamp Hole Spacing Along Length:

Clamp Hole Spacing Along Width:

2D Image

3D CAD STP

File:ColdSawV1Swivelplate.stp

2D Fabrication Drawing PDF

File:ColdSawV1Swivelplate.pdf

2D Fabrication Drawing DXF

File:ColdSawV1Swivelplate.dxf

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files/Swivel_Plate&oldid=63915"