Aaron Log

From Open Source Ecology
Revision as of 02:53, 2 October 2012 by Aaron Makaruk (talk | contribs)
Jump to navigation Jump to search

10/01/12

Remote Management of Machine Designer - Lenny-Wayne Patterson

Remote Management of Machine Designer - Tim Boyd

Accounting

  • To Do: see if checks are scanned and viewable online, check with Marcin on items I don't recognize

CNC Torch Table

  • Checked with Yoonseo on the status of the torch table:

I've got torch table electronics handled. It will be very similar to the system used for the CNC Circuit Mill V2. Just a matter of making a large case, large screw terminals, then mounting and wiring the new stepper drivers (from Darren) with the Arduino Uno R3. Darren has a friend updating the gcode interpreter code. The mechanical side of the torch table is relatively easy and near completion. Marcin was on this last we discussed. Best, Yoonseo

09/30/12

  • Hybrid Structuring Strategy - Request for Hybrid Structuring Strategy from Marcin
  • Strategic Plan: transfered wiki doc to google doc.
  • Trencher: cut teeth off and took video for final video/blog post
  • Dan McCormick: set up meeting for Tuesday, October 2
  • Food Buying System: set up meeting with Shari for Tuesday, October 2. Write down agenda to make meeting effective and to shorten it from 1 hour to 15 minutes.
  • Induction Furnace: set up meeting with Tim Boyd for Monday, October 1. Write down agenda for review.
  • Backhoe: requested meeting for this week regarding finalization of design according to OSE Specs. span style="color:red"> Do you know what chnanges need to be made to make it more OSE Spec?
  • Email System: installed ActiveInbox
  • Accounting:

Older Logs

Aaron Log - Older