Modular Stove Fabrication Procedure

BOM

Start with BOM.

Build

Step 1

Study Concept: 2 boxes with slideable cover plates clamped down. Ash tray and flame deflector plates side in similar fashion.

Step 2

• Cut angle for 2 mitered frames, just like for Power Cube 6.

• • Use Ironworker for mitered cuts:

• • Result: corners fit together such that all metal angle form flat planes

[[Image:mitered.jpg|300|Mitered corners with 2"x2" angle

Quality Control

• 3 corners fit so there is no more than 1/8" space anywhere
• length of members within 1/4" tolerance

Then, the build: