Cris Log
Jump to navigation
Jump to search
Wed. 4 Jun. 2014
- Started documenting CEB 6 Solenoid Assembly Manual
- Uploaded File:SolenoidAssembly.FCStd
- Removed Solenoid Assembly from old Brick Press for updating FreeCAD model & for cleaning/degunking
- Reassembled CEB Press with a team [CEB Press]
Tues. 3 Jun 2014
- Documented problems encountered during Lasersaur Exterior Panel Installation
- Started Workshop reorganize and fixed some power tool plugs and extension cord ends.
- Worked with a team to reassemble the CEB Press. Learned it is important to have a CAD model that matches the actual model. Also good to replace nuts and washers onto corresponding bolts while disassembling in order to simplify reassembly.
Mon. 2 Jun 2014
- Sketchup practice
- CEB Press 6 - Drawer Guides - Build Instructions
- Started Mounting Lasersaur CNC Laser Cover Plates: need to drill additional holes as per Lasersaur Manual
- Edited Lasersaur CAD model to include dimensions and location of panel holes [1],[2],[3],[4],[5],[6]
![[1]](http://opensourceecology.org/wiki/File:LasersaurTopPanels.jpg){kind=link}
![[2]](http://opensourceecology.org/wiki/File:LasersaurTopDoorPanels.jpg){kind=link}
![[3]](http://opensourceecology.org/wiki/File:LasersaurFrontDoorPanels.jpg){kind=link}
![[4]](http://opensourceecology.org/wiki/File:LasersaurRightSidePanel.jpg){kind=link}
![[5]](http://opensourceecology.org/wiki/File:LasersaurLeftSidePanel.jpg){kind=link}
![[6]](http://opensourceecology.org/wiki/File:LasersaurFrontPanels.jpg){kind=link}
Sat. 31 May 2014
- Finalized prep for OSE
- Installed software recommended in DPV Offer Letter