3D House Printer

From Open Source Ecology
Revision as of 01:17, 6 December 2015 by Marcin (talk | contribs) (Created page with "Talk about printing septic tanks or aquaponic troughs in situ for our next aquaponic workshop:) If the print is thin, then we can get a decent cost. Say for 2" thick walls for...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Talk about printing septic tanks or aquaponic troughs in situ for our next aquaponic workshop:) If the print is thin, then we can get a decent cost. Say for 2" thick walls for a 3x4x26 foot pond like ours, that is still 2 cubic yards of concrete - but not really concrete but concrete with smaller aggregate - minimum of $200 dollars delivered. Not bad, if you don't do the labor. But without rebar, it will crack - so special mixes are desired.

<hml><iframe width="560" height="315" src="https://www.youtube.com/embed/DQ5Elbvvr1M" frameborder="0" allowfullscreen></iframe></html>

Retrieved from "https://wiki.opensourceecology.org/index.php?title=3D_House_Printer&oldid=133015"