How to Seal Hot Water Pipe Joints

From Open Source Ecology
Revision as of 01:04, 22 January 2017 by Marcin (talk | contribs)
Jump to navigation Jump to search

Keywords: penetrating, anaerobic, thread sealer, thread locker, penetrating grade, wicking grade

Note: wicking type thread lockers are recommended for up to 1/2" size bolts

  • Loctite Putty - 121C - [1]
  • JB Waterweld - 300F - can cure wet - [2]
  • Gorilla epoxy - 200F - [3]
  • Check.pngJB Weld 8281 - 2 Part - 550F - [4]
  • Penetrating threadlocker, can be applied after assembly - does not say temp - only 1/2" pipes - [5]
  • JB - penetrating, 300F, water? - [6]
  • BSI - 300F penetrating, water resistant - [7].
  • MG Chemicals - 350F, water proof - [8]. [9]
  • VibraTite - 300F, water?, 1/2" bolt - [10]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=How_to_Seal_Hot_Water_Pipe_Joints&oldid=146695"