D3D Controller

From Open Source Ecology

Revision as of 20:32, 13 March 2017 by Marcin (talk | contribs) (→‎Code)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

BOM

Splitter - [1]
Coupler - [2]

Wiring

For wiring detail, see Prusa i3 Build Optimization

Code

Start with OSE Folgertech Prusa i3 Marlin - File:OSE Marlin.zip
The firmware code which is uploaded to the control Arduino (part of RAMPS) is a bunch of files contained in a folder, totaling 1.5 MB. The main file for configuration is configuration.h. When using the Arduino Environment, load Marlin.ino when opening new file. This will open up the whole bunch of Marlin files. To upload to RAMPS - use a USB cord.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_Controller&oldid=149198"