Delamination

From Open Source Ecology

Revision as of 01:28, 14 May 2017 by Marcin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Cool environment is the biggest culprit for delamination. ABS is particularly bad. ABS industrial printing happens in 75C heated chambers. Nozzles tend to clog at 50C for standard home 3D printing. [1]

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Delamination&oldid=152181"