D3D Lulzbot Cura

Introduction

Lulzbot Cura allows for ready setup of machines other than Lulzbot and Lulzbot Mini. By going to Expert-> Switch to Full Settings - you can set nozzle size and various parameters. Once all configuration has been input, you can save the profile as a .ini file.

To configure a new machine (bed size) go to the menu - Machine-> Add New Machine - you can add a profile for the D3D Original - 8" print bed.

Files

Configuration (.ini) file for D3D Lulzbot Cura:

File:D3DOriginal config.ini - D3D Original, 16" frame, 8" print bed, 0.5" nozzle.