G-code

From Open Source Ecology

Revision as of 02:52, 25 May 2018 by Marcin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

G1 E10 - spit 10 mm of filament
M503 - prints parameters
M92 - sets feed rate, such as extruder - M92 E408
G92 - resets coordinates to given values [1]
G90 - set absolute positioning
G91 - set relative positioning

Retrieved from "https://wiki.opensourceecology.org/index.php?title=G-code&oldid=172386"