Cura Machine Settings Notes

From Open Source Ecology

Revision as of 01:49, 27 May 2018 by Marcin (talk | contribs) (Created page with "*Note that in Machine Settings, if E steps per mm are set to 0, the print still works. So it appears that the conifiguration.h value for E steps takes precedence. It is not in...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Note that in Machine Settings, if E steps per mm are set to 0, the print still works. So it appears that the conifiguration.h value for E steps takes precedence. It is not in EEPROM as current version (Titan Aero) has EEPROM turned off.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cura_Machine_Settings_Notes&oldid=172565"