LifeTrac II mark2

LifeTrac II mark2 is 18" shorter than LT2 mark1.

Sketch 1 - In this first sketch the rear of LifeTrac2 has been shortened and moved in 18". This can be done by shortening the rear of the 4 base and 2 overhead 4×4×1/4" square tubes that run horizontal with the ground.

Sketch 2 - The middle column has been moved back to behind the front loader over-head shaft so it now sits in between the front and rear loader arm shafts. Also the real loader arm hydraulic cylinders have been changed to these - https://www.surpluscenter.com/item.asp?item=9-7711-14&catname=hydraulic which means adding extra mounting plates to the rear loader arm to attach them.