Open Source Rubber Extruder

From Open Source Ecology
Revision as of 17:12, 2 March 2019 by Marcin (talk | contribs) (Created page with "*Use the D3D CNC Circuit Mill to mill from Aluminum *Use a geared down stepper motor (3-5x) to enable printing with 3 mm and larger filaments, while simplifying the design...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Use the D3D CNC Circuit Mill to mill from Aluminum
  • Use a geared down stepper motor (3-5x) to enable printing with 3 mm and larger filaments, while simplifying the design of the extruder proper by removing the geardown from the extruder proper
  • Neckless design - filament goes straight into heat break
  • Heat break-less design in Phase 2 - the nozzle is larger and longer, and has a built-in heat break.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Open_Source_Rubber_Extruder&oldid=187033"