TMC 2130 Stepper Drivers

From Open Source Ecology

Revision as of 16:38, 14 April 2019 by Marcin (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Wire Via SPI

Solder certain bridges on the driver - not easy
Change Marlin code in configuration_adv.h
Need to change pins_RAMPS.h file to tell which pins are being used
Debug allows M122 in serial monitor for status
1. Define sensorless homing !!! This is useful.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=TMC_2130_Stepper_Drivers&oldid=189742"