3D Printer Tuning

First Layer Adhesion Calibration

• Just do a circle: and test quickly that you are getting first layer properly - by observing whether first layer is perfectly flat

File:Circlecalibration.fcstd. File:Circlecalibration.stl

Print Area Testing

• For an 8" bed - use this 8" square - File:8inchsquare.fcstd. STL - File:8inchsquare.stl
• 7" square - File:7inchsquare.fcstd. STL - File:7inchsquare.stl

Calibration of Filament and Bed Level

edit

Procedure

edit