D3D v20.04.27 Calculations

From Open Source Ecology

Revision as of 15:48, 5 May 2020 by Marcin (talk | contribs) (Created page with "=Extruder Driver Calculations= *5 mm drive radius on drive means - about 20 lb drive *Measurements: about 10 lb before filament slips; motor does not skip before slipping, so...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Extruder Driver Calculations

5 mm drive radius on drive means - about 20 lb drive
Measurements: about 10 lb before filament slips; motor does not skip before slipping, so tensioner is the limiting factor

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_v20.04.27_Calculations&oldid=219614"